How to tie a tie

How to tie a tie

Don’t know how to tie a tie? Go through this page and you will find the answer to the question. We will provide you detail instructions on tying a tie.

 

How to Tie the Four-in-Hand Knot

How to tie a tie

  • 1. Start with the wide end of the tie on the right and the small end on the left. Begin with the small end slightly above your belly-button (will vary depending on your height and the length & thickness of your tie). Only move the active (wide) end.
  • 2. Wide end over the small end to the left
  • 3. Under the small end and to the right
  • 4. Across the front and to the left
  • 5. Up into the neck loop from underneath
  • 6. Down through the loop you’ve just made in the front
  • 7. Tighten the knot by pulling down on the wide end. Slide the knot up & adjust.

 

How to Tie the Half Windsor Knot

How to tie a tie  How to tie a tie

  • 1. Start with the wide end of the tie on the right and the small end on the left. The tip of the small end should rest slightly above your belly-button (this will vary depending on your height and the length & thickness of your tie). Only move the active (wide) end.
  • 2. Wide end over the small end to the left.
  • 3. Under the small end and to the right.
  • 4. Up to the center, towards neck loop.
  • 5. Through the neck loop and to the left.
  • 6. Across the front, over to the right.
  • 7. Up into the neck loop from underneath.
  • 8. Down through the loop you’ve just created in the front.
  • 9. Tighten the knot by pulling down on the wide end. Slide the knot up & adjust.

 

How to Tie the Windsor Knot

How to tie a tie  How to tie a tie  How to tie a tie

  • 1. Start with the wide end of the tie on the right and the small end on the left. The tip of the small end should rest slightly above your belly-button (this will vary depending on your height and the length & thickness of your tie). Only move the active (wide) end.
  • 2. Wide end over the small end to the left.
  • 3. Up into the neck loop from underneath.
  • 4. Down to the left.
  • 5. Around the back of the small end to the right.
  • 6. Up to the center, towards neck loop.
  • 7. Through the neck loop and down to the right.
  • 8. Across the front to the left.
  • 9. Up into the neck loop from underneath.
  • 10. Down through the loop you’ve just created in the front.
  • 11. Tighten the knot by pulling down on the wide end. Slide the knot up & adjust.

 

How to Tie the Simple Knot (Oriental Knot)

How to tie a tie  How to tie a tie  How to tie a tie  How to tie a tie

  • 1. Start with the backside of the tie facing away from you, the wide end is on the right and the small end is on the left. The tip of the small end should rest slightly above your belly-button (this will vary depending on your height and the length & thickness of your tie). Move only the active (wide) end.
  • 2. Wide end under the small end to the left.
  • 3. Across the small end to the right.
  • 4. Up into the neck loop from underneath.
  • 5. Down through the loop you’ve just made in the front.
  • 6. Pull down on the wide end to tighten. Slide the knot up to adjust.

 

How to Tie the Kelvin Knot

How to tie a tie  How to tie a tie  How to tie a tie  How to tie a tie  How to tie a tie

  • 1. Start with the backside of the tie facing away from you, the wide end is on the right and the small end is on the left. The tip of the small end should rest slightly above your belly-button (this will vary depending on your height and the length & thickness of your tie). Move only the active (wide) end.
  • 2. Wide end under the small end to the left.
  • 3. Across the small end to the right.
  • 4. Under the small end to the left.
  • 5. Across the small end to the right.
  • 6. Up into the neck loop from underneath.
  • 7. Down through the loop you’ve just made in the front.
  • 8. Pull down on the wide end to tighten. Slide the knot up to adjust.

 

How to Tie the Prince Albert Knot

How to tie a tie  How to tie a tie  How to tie a tie  How to tie a tie  How to tie a tie  How to tie a tie

  • 1. Start with the wide end of the tie on the right and the small end on the left. The tip of the small end should rest slightly above your belly-button (this will vary depending on your height and the length & thickness of your tie). Only move the active (wide) end.
  • 2. Wide end over the small end to the left.
  • 3. Under the small end and to the right.
  • 4. Across the front and to the left.
  • 5. Under the small end and to the right.
  • 6. Across the front and to the left.
  • 7. Up into the neck loop from underneath.
  • 8. Down through both loops in the front.
  • 9. Tighten the knot by pulling down on the wide end. Slide the knot up & adjust. The first loop should show slightly underneath the second loop.

 

How to Tie the Pratt Knot (Shelby Knot)

How to tie a tie  How to tie a tie  How to tie a tie  How to tie a tie  How to tie a tie  How to tie a tie  How to tie a tie

  • 1. Begin with the backside of your tie facing forward, the wide end of the tie on the right and the small end on the left. The tip of the small end should rest slightly above your belly-button (this will vary depending on your height and the length & thickness of your tie). Only move the active (wide) end.
  • 2. Wide end under the small end to the left.
  • 3. Up to the center, towards neck loop.
  • 4. Through the neck loop and down to the left.
  • 5. Across the small end to the right.
  • 6. Up into the neck loop from underneath.
  • 7. Down through the loop you’ve just created in the front.
  • 8. Tighten the knot by pulling down on the wide end. Slide the knot up & adjust.

 

How to Tie the Eldredge Knot

 How to tie a tie  How to tie a tie  How to tie a tie  How to tie a tie  How to tie a tie  How to tie a tie  How to tie a tie  How to tie a tie
  • 1. Start with the wide end of the tie on the left and the small end on the right. The tip of the wide end should rest at the top of your belt buckle. Only move the active (small) end.
  • 2. Small end over the wide end to the left.
  • 3. Under the wide end and to the right.
  • 4. Up to the center, towards neck loop.
  • 5. Through the neck loop and to the left.
  • 6. Across the front, to the right. Then up into the neck loop from underneath.
  • 7. Down to the left and around the back of the wide end to the right. Keep this part loose.
  • 8. Bring it across the front towards the left and through the loop made in the previous step.
  • 9. Pull the small end towards the left to tighten.
  • 10. Up to the center, towards neck loop. Down through the neck loop and to the left.
  • 11. Up to the center, towards neck loop. Down through the neck loop and to the right. Keep this part loose.
  • 12. Across the front towards the left and through the loop made in the previous step.
  • 13. Pull the small end towards the left to tighten.
  • 14. Tuck the rest of the small end behind neck loop on the left side.
  • 15. Strut your stuff.

 

How to Tie the Van Wijk Knot

How to tie a tie  How to tie a tie  How to tie a tie  How to tie a tie  How to tie a tie  How to tie a tie  How to tie a tie  How to tie a tie  How to tie a tie

  • 1. Start with the wide end of the tie on the right and the small end on the left. The tip of the small end should rest slightly above your belly-button (this will vary depending on your height and the length & thickness of your tie). Only move the active (wide) end.
  • 2. Wide end over the small end to the left.
  • 3. Under the small end and to the right.
  • 4. Across the front and to the left.
  • 5. Under the small end and to the right.
  • 6. Across the front and to the left.
  • 7. Under the small end and to the right.
  • 8. Across the front and to the left.
  • 9. Up into the neck loop from underneath.
  • 10. Down through all three loops in the front.
  • 11. Tighten the knot by pulling down on the wide end. Slide the knot up & adjust. The first and second loop should show slightly underneath the third loop.

 

How to Tie the Trinity Knot

How to tie a tie  How to tie a tie  How to tie a tie  How to tie a tie  How to tie a tie  How to tie a tie  How to tie a tie  How to tie a tie  How to tie a tie  How to tie a tie

  • 1. Start with the wide end of the tie on the left and the small end on the right. The tip of the wide end should rest at the top of your belt buckle. Only move the active (small) end.
  • 2. Over the wide end to the left.
  • 3. Up into the neck loop from underneath.
  • 4. Down to the left.
  • 5. Around the back of the wide end to the right.
  • 6. Up to the center, towards neck loop.
  • 7. Through the neck loop and down to the left.
  • 8. Across the wide end to the right. Up into the neck loop from underneath.
  • 9. Down through the loop you created in the previous step. Keep loose.
  • 10. Bring the small end around the back of the wide end to the right.
  • 11. Bring it across the front towards the center and through the loop created in the previous step.
  • 12. Tighten and tuck the rest of the small end behind neck loop on the left side.
  • 13. Hypnotize the throngs of onlookers.

 

How to Tie the Murrell Knot

How to tie a tie  How to tie a tie  How to tie a tie  How to tie a tie  How to tie a tie  How to tie a tie  How to tie a tie  How to tie a tie  How to tie a tie  How to tie a tie  How to tie a tie

  • 1. Start with the small end of the tie on the right and the wide end on the left. The tip of the wide end should rest slightly below your belly-button (this will vary depending on your height and the length & thickness of your tie). Only move the active (small) end.
  • 2. Small end over the wide end to the left.
  • 3. Up into the neck loop from underneath.
  • 4. Down to the left.
  • 5. Around the back of the wide end to the right.
  • 6. Up to the center, towards neck loop.
  • 7. Through the neck loop and down to the right.
  • 8. Across the front to the left.
  • 9. Up into the neck loop from underneath.
  • 10. Down through the loop you’ve just created in the front.
  • 11. Tighten the knot by pulling down on the small end. Slide the knot up & adjust.

 

How to Tie the Balthus Knot

How to tie a tie  How to tie a tie  How to tie a tie  How to tie a tie  How to tie a tie  How to tie a tie  How to tie a tie  How to tie a tie  How to tie a tie  How to tie a tie  How to tie a tie  How to tie a tie

  • 1. Begin with the backside of your tie facing forward with the wide end of the tie on the right and the small end on the left.
  • 2. Wide end under the small end to the left.
  • 3. Up to the center, towards the neck loop.
  • 4. Through the neck loop and down to the right.
  • 5. Up to the center, towards the neck loop.
  • 6. Through the neck loop and down to the left.
  • 7. Up to the center, towards the neck loop.
  • 8. Through the neck loop and down to the right.
  • 9. Across the front of the small end to the left.
  • 10. Up into the neck loop from underneath.
  • 11. Down through the loop you’ve just made in the front.
  • 12. Pull down on the wide end to tighten. Slide the knot up to adjust.

 

How to Tie a Bow Tie

How to tie a tie  How to tie a tie  How to tie a tie  How to tie a tie  How to tie a tie  How to tie a tie  How to tie a tie  How to tie a tie  How to tie a tie  How to tie a tie  How to tie a tie  How to tie a tie  How to tie a tie

  • 1. Start with the bowtie lying face up. Adjust the bowtie so right side is shorter than the left. The end on the left will be referred to as A and the end on the right will be referred to as B.
  • 2. Move A to the right side, across B.
  • 3. Bring A under B and up through the neck loop.
  • 4. At the joint, fold B towards the right and then towards the left to create a the bow shape.
  • 5. Bring A stra­ight down over the middle of the bow shape that was made with B.
  • 6. Fold A back towards the chest and pinch the fold.
  • 7. Push the pinched end (A) through the loop behind B.
  • 8. Pull on the folded parts of the bow to tighten.
  • 9. Adjust until balanced on both sides.

 

 

Do you like this article? Share it on social networks bellow or follow us.

We dont want to disturb you during reading by popup messages and announcements. If you like this website, support us by sharing on social networks or follow us. Thank you
Tony
Tony is administrator of How2Db.com. His hobby is creating "How to" tutorials, Ice hockey and his 1yr old son 🙂
Tony on EmailTony on FacebookTony on GoogleTony on Twitter
Rate this article
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...